9 DIY Headboard Ideas That Transform Your Bedroom for Under $50

A bed pushed against a bare wall looks unfinished, and pillows slide down the gap at night. A headboard fixes both, but upholstered ones from furniture stores often cost $200 to $500.

The nine DIY versions below cost much less. Prices are rough figures for a queen bed; a full or twin costs less. Some need a few hours with a drill or staple gun, and several need no tools at all, which suits renters. The four bedrooms in these photos show the range, from a rough pallet to a tall tufted panel.

DIY headboard made from a reclaimed wood pallet behind a bed with linen bedding, a crate nightstand with a bulb lamp and a jute rug

1. A reclaimed pallet headboard

A wooden pallet stood on its side behind the bed, like the one in this photo, makes a rustic headboard for little or nothing. Pallets are often free from hardware and garden stores if you ask. This bedroom uses pallets for the bed base too, with a wooden crate as a nightstand.

Check the stamp before bringing a pallet indoors. Choose ones marked HT, meaning heat-treated, and avoid any marked MB, which were treated with a chemical fumigant. Skip pallets with stains or a strong smell.

Sand the pallet thoroughly, since they're rough and splintery, and seal it with a clear matte finish. A standard pallet is about 48 inches wide; two side by side cover a queen or king.

Screw the pallet to the bed frame or to wall studs so it can't tip forward. Pallets are heavier than they look.

Tall tufted beige upholstered headboard edged with fairy lights behind linen bedding, captioned DIY Headboards Under $50

2. An upholstered panel from plywood and foam

A padded fabric headboard, like the tall tufted one in this photo, looks the most expensive, and you can make a simple version yourself. Cut plywood or MDF to size, glue on 2-inch foam, cover with batting and wrap it in fabric, stapling it tight on the back.

For a queen bed, cut the board about 62 inches wide, a little wider than the mattress. A sheet of plywood costs $25 to $50 and fabric $15 to $30, so the total often comes to $50 to $90. An old mattress topper instead of foam brings it closer to $50.

Tufting with buttons is optional and takes time. A plain padded panel or one with simple channels looks clean and is easier.

Hang the panel on the wall with a French cleat or attach it to the bed frame with bolts. The fairy lights along the edge here add a soft glow; use LED strands only near fabric.

Small bedroom with geometric peel-and-stick wallpaper in soft neutrals on the wall behind the bed and a floating wood nightstand

3. Peel-and-stick wallpaper behind the bed

Peel-and-stick wallpaper on the wall behind the bed, like the soft geometric pattern in this photo, creates a headboard effect without any furniture. It comes off cleanly when you move, which makes it a good choice for renters.

Cover a section the width of the bed plus a little on each side, from the floor to the ceiling or to about 5 feet high. A queen-width panel usually takes two or three rolls, at about $25 to $40 each.

Clean the wall first and let fresh paint cure for at least two to three weeks before applying. Smooth each strip with a plastic smoother as you go, and line up the pattern carefully.

Test a small piece in a corner first, since some wallpapers can lift paint from walls in older apartments.

Large macrame wall hanging on a wooden dowel above a low wood bed with fairy lights and pillows, captioned Affordable Headboard Ideas That Transform

4. A large macrame hanging

A big macrame or woven wall hanging above the bed, like the one on a wooden dowel in this photo, works as a soft headboard for a boho room. It frames the bed and adds texture without any construction.

Choose a hanging about two-thirds the width of the bed or wider. Large hangings cost $30 to $80, or make one with macrame cord and a wooden dowel, which costs $20 to $30 in materials and a weekend of knotting.

Hang it from two screws or hooks into studs, since large hangings are heavier than they look. Keep the bottom a few inches above the pillows so it doesn't get pulled.

5. A painted shape on the wall

A painted rectangle, arch or circle on the wall behind the bed costs only a sample pot of paint and some painter's tape. It's one of the cheapest headboards there is.

Mark the shape with a pencil, a level and a string compass for curves, tape the edges and paint two coats. An arch about the width of the bed and 4 to 5 feet tall suits most rooms.

In a rental, ask before painting, and keep the original color details so you can paint over it when you leave.

6. Fabric panels on a dowel

A wooden dowel or curtain rod mounted above the bed, with fabric panels hanging from it, makes a soft, drapey headboard. Linen, a pretty tablecloth or a vintage quilt all work.

A dowel costs a few dollars, and a pair of curtain brackets holds it. Hang the fabric so it falls behind the bed, and wash it every few months.

For a fuller look, hang two panels and tie them back loosely at the sides with ribbon or cord. Choose a fabric heavy enough to hang straight, since very thin fabric shows every wrinkle.

7. A pegboard headboard

A pegboard panel behind the bed holds small shelves, hooks and plants, so the headboard doubles as storage in a room with no space for nightstands. Paint it the wall color or a contrast.

Mount it on spacers so hooks fit behind it, screw it into studs, and keep anything heavy off the part directly above your head.

A 2-by-4-foot pegboard costs about $15 to $25 at most hardware stores. Mounted horizontally, one covers a 38-inch twin bed; use two side by side for a queen.

8. Thin wood planks

Thin pine or plywood planks, cut to length and fixed to a plywood backing, make a shiplap-style headboard. Stain or paint them, and leave a small gap between boards for a classic look.

Most hardware stores will cut boards to length for free. Attach the finished panel to the wall with a French cleat so it can come down when you move.

Weathered-look boards, or new ones distressed with a wire brush and a gray stain, give a farmhouse feel. Plain boards painted white look cleaner and more modern. Expect about $30 to $50 in wood for a queen-size panel.

9. A gallery of frames

A row or grid of frames above the bed does the job of a headboard and adds personality. Thrifted frames painted one color look like a set.

Keep frames light, with acrylic instead of glass, and use strong removable strips or picture hooks into studs. Nothing heavy should hang where it could fall on someone in bed.

Hang the lowest frames 8 to 10 inches above the top of the pillows, and keep the whole group within the width of the bed so it reads as a headboard.

Choosing the right height and width

A headboard should be at least as wide as the mattress, and ideally 2 to 4 inches wider on each side. A queen mattress is 60 inches wide and a full is 54, so aim for about 62 to 66 inches and 56 to 60 inches respectively.

For height, 48 to 60 inches from the floor suits most bedrooms. A taller headboard, like the tufted one in the second photo, can make a room with a low ceiling look taller, but check it doesn't block a window or an outlet you need.

Common questions

What's the cheapest DIY headboard?

A painted shape on the wall, or a free heat-treated pallet. Both cost under $20.

How do you attach a headboard without a bed frame?

Mount it on the wall with a French cleat or heavy-duty picture hooks screwed into studs, so it sits just behind the mattress.

Measure the bed and choose the method that suits your tools and lease. For more bedroom ideas, see our guides to bedroom refreshes under $30 and accent walls for a tiny bedroom.